← Back to Project the Rayong site cooling tower fan blade being measured before refurbishment

Rayong: Ten-Blade Fan Coating and Hub Fabrication

Synergy Services completed the scope documented below. Measured results are shown only where this page states them.

Protective refurbishment of ten fan blades combined with fabrication of two new HDGS fan hubs and SUS304 hub fasteners.

Project at a glance

ItemProject record
CustomerSite identity withheld
LocationRayong, Thailand
Source basisContracted work order; completed
Publication statusCompleted scope; measured results are shown only where stated

Source-backed scope

  • Abrade and degrease ten fan blades.
  • Repair material loss with Devcon 11700 ceramic repair putty.
  • Apply two coats of Interzone 954 and statically balance the blades.
  • Fabricate two 1,505 mm-diameter HDGS hubs with SUS304 bolts.

Engineering focus

This case combines refurbishment with fabrication, showing an alternative to replacing the entire fan assembly.

Project status

Scope completed as documented above. This page describes the contracted work; measured results are shown only where the page states them. Images on this page document the work covered by this scope.