← Back to Project
Buriram: Two-Cell SmartFan Upgrade
The Buriram site’s work order specifies two FRP fan sets for a cooling-tower upgrade.
| Design item | Work-order value |
|---|---|
| Model | SmartFan 4.2F-6450-07-HD-TS |
| Diameter | 6,450 mm |
| Blades | 7 FRP blades |
| Fan speed | 183 rpm |
| Design airflow | 283.99 m³/s |
| Static pressure | 18 mmH₂O |
| Rotor shaft power | 70.8 kW |
| Stated total efficiency | 88.25% |
The scope includes fan replacement on two cells, drive-train/fan-geometry checks, post-install vibration and test run, plus an airflow test after installation.
The design values above come from the work order and supplier selection. They are not measured field results.
Project status
Scope completed as documented above. Commissioning measurements are not published on this page.
